Contact Us Now
GET SOCIAL
-
Timing Gear Housing For 2.8TC Engine -
Sale!
For Model Wingle 5 CC1031PS7A. Looking for wiper motor for other model, please contact our sales manager Now. Whatsapp:008617503319627 Tel: 008617503319627 Email: [email protected] -
The plastic bumper is composed of three parts: the outer plate, the buffer material and the beam. The outer plate and buffer material are made of plastic, and the beam is stamped with a cold-rolled sheet with a thickness of about 1.5 mm to form a U-shaped groove; the outer plate and buffer material are attached to the beam, and the beam and the frame longitudinal beam are screwed together, which can be used at any time. Remove it. The plastic used in this plastic bumper is generally made of polyester and polypropylene. -
Piston rings are metal rings that are embedded in the grooves of the piston. There are two types of piston rings: compression rings and oil rings. The compression ring is used to seal the combustible mixture in the combustion chamber; the oil ring is used to scrape excess oil from the cylinder. -
Sale!
The fuel filter element is used to filter out the sundries in the fuel. The alias is the oil-water separator and the diesel fine filter, which is a microporous paper filter element. In the early days, the filter elements of gasoline filters were metal sheet slot type, metal filter mesh type, nylon cloth type, porous ceramic type and so on. -
Sale!
The brake shoe is the friction couple of the drum brake. In addition to the strength and rigidity required as a component, it should also have a friction coefficient as high and stable as possible, as well as appropriate wear resistance, heat resistance and heat dissipation. and heat capacity, etc. -
Sale!
The generator belt should generally be replaced when the car travels 60,000 to 80,000 kilometers, and a small number of cars can be replaced after 100,000 kilometers. We recommend it should not exceed 80,000 kilometers at most. -
The shock absorber is a vulnerable part during the use of the car. The performance of the shock absorber will directly affect the driving stability of the car and the life of other parts. Therefore, the shock absorber should always be in good working condition. After determining that the shock absorber has a problem or fails, first check whether the shock absorber leaks oil or has signs of old oil leakage. -
T thermostat assembly is a valve that controls the coolant flow path. It is an automatic temperature adjustment device, usually containing a temperature sensing component, which turns on and off the flow of air, gas or liquid by thermal expansion or cold contraction. -
The high pressure fuel pump is the interface between the high-pressure fuel circuit and the low-pressure fuel circuit. Its function is to generate fuel pressure in the common rail pipe by controlling the fuel output. In all operating conditions, it is mainly responsible for providing sufficient high-pressure fuel to the common rail. -
FUEL FILLER: Due to strict regulations on gasoline evaporation, the requirements for low fuel permeability are increased. Therefore, DAI-EL with good low fuel permeability is applied to the fuel pipe of automobile. -
The shallow oil pan is the lower half of the crankcase, also known as the lower crankcase. The function is to close the crankcase as the casing of the oil storage tank, prevent impurities from entering, and collect and store the lubricating oil flowing back from the friction surfaces of the diesel engine, dissipate part of the heat, and prevent the oxidation of the lubricating oil. -
Car fuel pressure regulators can affect idle speed. It will cause idling jitter, poor acceleration, and even flameout. At the same time, fuel consumption will increase. The fuel pressure regulator must be replaced in time. -
Plastic Buckle 09630001 is a mechanism used for embedded connection or integral locking of one part and another part, usually used for the connection of plastic parts, and its material is usually composed of plastic material with certain flexibility. The biggest feature of the snap connection is that it is easy to install and disassemble, and it can be disassembled without tools. Now the snap connection technology has been widely used in the connection of automotive interior parts -
1) According to the operating regulations, avoid the clutch from being half-engaged and half-disengaged, and reduce the number of times the clutch is used. 2) Pay attention to maintenance, and use the cooking method to soak the butter so that it has sufficient lubricant during regular or annual inspection and maintenance. 3) Pay attention to leveling the clutch release lever to ensure that the elastic force of the return spring meets the regulations. 4) Adjust the free stroke to meet the requirements (30-40mm) to prevent the free stroke from being too large or too small. 5) Minimize the times of joining and separating, and reduce the impact load. 6) Step lightly and easily to make it engage and disengage smoothly. -
The clutch pressure plate is one of the important components of the clutch, which can press the clutch driven plate to the flywheel, transmit the engine torque, and vice versa, control the rotation of the driven plate.