Contact Us Now
GET SOCIAL
-
The replacement cycle of wiper blades is generally about a year, mainly depending on the frequency of use, and remember to clean the wiper blades with a towel after each rain, which not only increases the service life but also protects the glass. -
Car fuel pressure regulators can affect idle speed. It will cause idling jitter, poor acceleration, and even flameout. At the same time, fuel consumption will increase. The fuel pressure regulator must be replaced in time. -
For Engine Model GWM 4D20. Looking for TurboCharger, Super Charger, turbosuperchager for other model, please contact our sales manager Now. Whatsapp:008617503319627 Tel: 008617503319627 Email: [email protected] -
Timing Gear Housing For 2.8TC Engine -
The timing belt is an important part of the engine's air distribution system. It is connected with the crankshaft and matched with a certain transmission ratio to ensure the accuracy of the intake and exhaust time. The use of belts rather than gears for transmission is because belts are less noisy, less variable and easier to compensate for. Obviously, the life of the belt must be shorter than that of the metal gear, so the belt should be replaced regularly. -
Symptoms of a broken tie rod end mainly include the following conditions. First, if the tie rod end of the front wheel of the car is broken, the following symptoms will appear: the road section is bumpy, thump, thump; the car is unstable, swaying left and right; braking deviation; direction failure. The second is that the tie rod end is too wide, and it is easy to break when subjected to impact load. Repair as soon as possible to avoid danger. -
T thermostat assembly is a valve that controls the coolant flow path. It is an automatic temperature adjustment device, usually containing a temperature sensing component, which turns on and off the flow of air, gas or liquid by thermal expansion or cold contraction. -
The stabilizer bar, also known as the anti-roll bar and the balance bar, is an auxiliary elastic element in the automobile suspension. The function of the anti-roll bar is to prevent the body from leaning excessively when cornering and to improve the driving stability of the car on uneven roads. -
The shallow oil pan is the lower half of the crankcase, also known as the lower crankcase. The function is to close the crankcase as the casing of the oil storage tank, prevent impurities from entering, and collect and store the lubricating oil flowing back from the friction surfaces of the diesel engine, dissipate part of the heat, and prevent the oxidation of the lubricating oil. -
1) According to the operating regulations, avoid the clutch from being half-engaged and half-disengaged, and reduce the number of times the clutch is used. 2) Pay attention to maintenance, and use the cooking method to soak the butter so that it has sufficient lubricant during regular or annual inspection and maintenance. 3) Pay attention to leveling the clutch release lever to ensure that the elastic force of the return spring meets the regulations. 4) Adjust the free stroke to meet the requirements (30-40mm) to prevent the free stroke from being too large or too small. 5) Minimize the times of joining and separating, and reduce the impact load. 6) Step lightly and easily to make it engage and disengage smoothly. -
Sale!
The brake shoe is the friction couple of the drum brake. In addition to the strength and rigidity required as a component, it should also have a friction coefficient as high and stable as possible, as well as appropriate wear resistance, heat resistance and heat dissipation. and heat capacity, etc. -
In a high temperature working environment, the engine must be properly cooled to keep it working at a suitable temperature to meet the requirements of good engine performance, durability and exhaust emissions. The engine cooling system plays a key role here. Includes critical cooling fans, water tanks, thermostats, and more. -
Car radiators usually refer to engine radiators. The radiator consists of three parts: the water inlet chamber, the water outlet chamber, the main piece and the radiator core. The coolant acts in the radiator core, and the air passes through the radiator core. The hot coolant is cooled by dissipating heat to the air, and the cold air is warmed by receiving heat from the coolant, so the radiator is a heat exchanger. -
Plastic Buckle 09630001 is a mechanism used for embedded connection or integral locking of one part and another part, usually used for the connection of plastic parts, and its material is usually composed of plastic material with certain flexibility. The biggest feature of the snap connection is that it is easy to install and disassemble, and it can be disassembled without tools. Now the snap connection technology has been widely used in the connection of automotive interior parts -
Piston rings are metal rings that are embedded in the grooves of the piston. There are two types of piston rings: compression rings and oil rings. The compression ring is used to seal the combustible mixture in the combustion chamber; the oil ring is used to scrape excess oil from the cylinder. -
The main function of the oil pan 1009100-EG01 is to store oil (lubricating oil) and close the crankcase. The oil pan bears little force and is generally stamped from a thin steel plate. Its shape is determined by the general arrangement of the engine and the capacity of the oil.